Airfusion Akmani Installation Instructions
54 |
P a g e
: NATURAL FLOW BUTTON: Press the button to set the fan running at changing speed automatically. If the fan is
working at speed 1, 2, 3, then press this button to let the fan run at a lower changing speed. If the fan is working at
speed 4,5,6, then press this button to let the fan run at a higher changing speed.
:
LIGHT CONTROL BUTTON:
Press the button to turn on/off the light.
When pressing the remote button, the LED indictator 1(
)
will be on. If the LED indicator 1 is off, then you need to
replace the battery with a new 12VDC battery.
When pressing the remote button, if the receiver receives the signal well, it will make a beep sound.
REPAIRING THE FAN RECEIVER & REMOTE PAIRING
Should the remote and receiver lose control after installation or during use, the pairing of the remote and the receiver
must be repaired. Below are the operating symptoms and method to repair the pairing of the DC ceiling fan remote and
receiver.
Issues:
Loss of control - Fan is only running at high speed after installation
Loss of control - No reverse function after installation
Loss of control - Remote cannot communicate with the receiver
Solution:
Switch off the main power to ceiling fan.
Pr
ess and hold the “
” button on
transmitter
for 5 seconds within 30 seconds of switching the power to the
receiver of the ceiling fan.
Once the transmitter is paired with the receiver of the ceiling fan, it will make a beep sound twice. Turn ON/OFF
or change the speed of the ceiling fan by the transmitter to check the operation.
AFTER INSTALLATION
WOBBLE:
Note:
Ceiling fans tend to move during operation due to the fact that they are mounted on a rubber grommet. If the fan
was mounted rigidly to the ceiling it would cause excessive vibration. Movement of a few centimeters is quite acceptable
and does not suggest any problem.
TO REDUCE THE FAN WOBBLE:
Please check that all screws which fix the mounting bracket and down rod are
secure.
BALANCING KIT:
A balancing kit is provided to balance the ceiling fan on initial installation. Please refer to the
instruction on how to use the balancing kit.
The balancing kit can be used to assist re-balancing should the ceiling fan
