Top Plate Assembly
Bottom Plate
Step 8
(4Pl.) 4mm x 25mm Pin
HeadSecurity Screws
Step 9
LG1810K Release Key
LG1810 Top Plate
(4Pl.) 5mm x 6mm
Phillips Machine Screws
LG Monitor Base
Step 7
(5Pl.) #6 x 1/2"
Phillips Tapping Screws
LG1810B INSTALLATION INSTRUCTIONS
LG1810B_Install (7/11) ©2011 Lucasey Manufacturing Corporation, Oakland, California www.lucasey.com
Protected under one or more of these U.S. Patent numbers: 3,291,432 3,559,942 3,724,798 DES.270,689 4,613,109 4,878,645 4,852,842 DES.309,5624,973,023 5,169,114 5,255,884 5,310,152 5,522,576 5,621,614 Re.35,677 DES.398,834 5,826,384 5,941,492 5,964,068 6,060,661 6,102,398 6,158,704 6,454,116B1 6,761,276B2 6,806,425B1
Page 2 of 2
Align the Release Key with the middle of the mount
and Slide the Release Key between the Top Plate
Assembly and the Bottom Plate.
Once the Release Key is inserted all the way, the
top and bottom plates will release from each other
by lifting up and back with the monitor attached
to the LG1810 Top Plate.
Monitor Removal
7.
8.
9.
Attach the LG1810 Top Plate to the LG Monitor Base
with the provided 5mm x 6mm Phillips Machine
Screws & #6 x 1/2" Phillips Tapping Screws
Align the slots on the Top Plate Assembly with the
rivets on the Bottom Plate. Pull forward on the Top
Plate Assembly to lock the two plates together.
Double check that all of the rivets have properly
seated by lifting up on all four corners of the Top
Plate Assembly. Push the Top Plate Assembly back
to make sure the attachment is secure.
Note: Aligning the mount plates with the monitor
attached to the monitor base is not recommended.
Attach the LG Monitor to the Monitor Base with the
provided 4mm x 25mm Pin Head Security Screws.
Follow the LG instructions for attaching the Monitor
Base to the LG Monitor.
(Security Screws Require a 5/32" Hey Key with Hole
to install and remove, sold separately with the
LG1810K - Release Key)
