Lubing TwinClean Line Скачать руководство пользователя страница 9

Страница: 9 / 30

Drinking systems

floor watering system TwinClean Line

3.4.2 Fitting the main water supply

The main water supply should be attached in such a way that it is always protected from frost.

For versions with a solenoid valve, the standard version of the time relais must be connected to a mains voltage of

240 V 50 Hz via the mains plug.

Please note the information on mains voltage on the delivery note.

The components required for the main water supply are supplied ready-assembled.

The attachment (a stable metal console

[1]

) guarantees a firm, secure and waterproof connection of the components.

The main water supply can therefore be installed on the wall, usually in the front part of the building. The 6 drill holes

[4]

in the metal console are 10mm in diameter.

The flange connections

[2]

permit easy exchange of individual components. The connections to the main water

supply are provide d by the ¾" internal screw threads of the ball valves (inlet and outlet

[3]

When using a medicator please refer to the enclosed instructions.

[3]

[4]

[1]
[4]

[2]

[4]

[3]

DANGER!

Protect from frost.

Frost can destroy the components!

DANGER!

Warning of electrical hazard!

For versions with solenoid valve: fit switching cabinet in such a way that it is protected from water!

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

Содержание TwinClean Line































Результаты поиска

Содержание TwinClean Line

Отзывы:

Бренды по названию

Популярные бренды

Lubing TwinClean Line, Руководство по сборке

Результаты поиска

Содержание TwinClean Line

Отзывы:

Бренды по названию

Популярные бренды