Lubemaster OS600 Standard, Инструкция по эксплуатации и каталог запасных частей

Страница: 17 / 29

Lubemaster OS600 Std
3102 Operating Manual V2020.01
Page 17 of 29
ALWAYS TURN OFF THE OIL SUPPLY AT THE SYSTEM WHEN LEAVING THE MACHINE STANDING
FOR LONG PERIODS.
• Place rag around the base of the centrifuge to collect the small quantity of oil which may drip
from inside the cover when removed.
• DO NOT REMOVE THE CLAMP OR THE ROTOR COVER UNTIL THE ROTOR HAS COMPLETELY
STOPPED SPINNING - allow about 10 minutes standing time for the oil to drain from the rotor.
• Remove the clamp from the rotor cover and remove cover by unscrewing the top nut – all
threads are right hand.
• Place a bucket handy to the rotor and lift the rotor off the spindle immediately into a bucket or
container.
• Remember that the centrifuge base will now become a receptacle for airborne dust and must
be kept covered while the rotor is removed, otherwise dust will enter the circuit.
• Move the rotor to the cleaning station and unscrew the top nut of the rotor and remove the
rotor shell taking care to support the rotor carefully and not to cut the “O” ring.
• Complete dismantling the rotor until all 4 components are separated.