LU-VE ALFA Optigo SFMD, Оригинальное руководство пользователя

Страница: 5 / 24

31515694EN-02
5
Alfa LU-VE is a trademark registered and owned by LU-VE Group.
Alfa LU-VE reserves the right to change specifications without prior notification.
quantity, even minimal, of inflammable gas and that it has been washed internally with inert
gas (ex. nitrogen). all operations must be performed by personnel qualified in the use of
flammable gases.
• The product shall not be modified in any part of it, by removing or adding component.s
• The product is not an Atex product. The connection of any system component that is not already
assembled in the factory, must take place outside the product, at an appropriate distance and
check that its installation complies with all the regulatory requirements applicable to flammable
gas systems.
• The product is not an Atex product. It is the responsibility of the installer to verify the compliance
of the product and its incorporation in the system to european and national standards.
• In the case of components that must necessarily be installed inside the product, the compliance
of the final assembly is the responsibility of the installer. in particular:
- the use of any component, electrical or mechanical, which may be the origin of sparks or
flames, is forbidden. Only the exclusive use of components suitable for use in explosive
atmosphere (Atex) is allowed.
- the use of components that may be cause of flammable gas leaks is forbidden.
The installation of components of the refrigerant circuit is allowed only with permanent brazed
connection.
1.7 Checks at delivery
At the moment of delivery, carefully check the units.
All finned coils are pressure tested with dry air, sealed and supplied with a slight overpressure. Prior
to installation, the leak resistance must be checked with the Schrader valve.
Any present damage must be reported on the delivery note with a description of the damage.
Damaged heat exchangers, including when the damage is not externally visible, are to be reported
to the shipping agent and Alfa LU-VE within 24 hours.
1.8 Return of unused heat exchangers
Air heat exchangers that have been delivered in accordance with orders are in principle not return-
able. Heat exchangers can only be returned under certain conditions and following consultation with
Alfa LU-VE. This applies exclusively to unused units. The heat exchangers that are to be returned
should be delivered carriage paid to Alfa LU-VE in the original, undamaged and unwritten factory
packaging. Not returnable are:
• Heat exchangers older than three months from the invoice date.
• Heat exchangers that have already been built in and/or are damaged.
1.9 Guarantee
For our guarantee conditions, we refer to the Terms of Delivery. In general, the warranty period
between Alfa LU-VE and the customer is 24 months from factory invoice date or 12 months of
operation, which ever comes first. Heat exchangers must not be returned or disposed of, other
than in accordance with instructions from Alfa LU-VE. Contact your local Alfa LU-VE representative
before any remedial action is taken on the units, otherwise warranty may be void.
1.10 Disposal
After decommissioning the heat exchanger coil should be emptied from refrigerant fluids. Avoid
any emissions in the environment. Any refrigerants and oil residuals must be properly disposed of
according to applicable environmental regulations. The fully emptied heat exchanger unit, including
all electrical components, should be handed in to the proper authorized companies for recycling.