Installation Guide
5
1. Introduction
With weather resistant feature, the Integrated High Speed Dome Camera is
applicable to outdoor installation. The dome camera supports one cabling for
easy installation, and can be integrated with CCTV products, such as DVRs,
Control Keyboards, and CCTV accessories for a total surveillance solution. In
addition, large set of built-in protocols provide connectivity to other
surveillance systems. The built-in protocols include DynaColor, Pelco, VCL,
Philips, AD-422 (Manchester), etc., which allow the Integrated High Speed
Dome Camera to be integrated with other suppliers' surveillance systems.
General Operation Requirements:
A minimum of one control device is required for operation, such as a control
keyboard, a DVR or a PC. The integrated high speed dome camera contains
a built-in receiver that decodes commands from a control device.
Connect dome cameras to other devices, as shown in the diagram below, to
complete a video surveillance system.
NOTE:
To extend the network distance up to 1.2 km (4000 feet) and to
protect the connected devices, it is highly recommended to place a
repeater at the mid-point. However, a repeater may be needed in the network
distance less than 1.2 km if the used cables are not the CAT 5, 24-gauge
cables (see 3.3.4 RS-485 Connector Definition).
Refer to the repeater’s
manual for detailed information.