Installation Manual of HD-TVI Speed Dome
7
Chapter 2
Installation
Before you start:
Check the package contents and make sure that the device in the package is in good condition and
all the assembly parts are included.
Confirm the
wiring is right.
Start
Installation
Preparation
Wiring
Installing Bracket
Setting DIP Switch
Installing Speed Dome
& Connecting Cables
Power-on &
Self-test
End
Succeeded
Failed
No
Yes
Figure 2-1
Installation Flow Diagram
2.1
Cable Descriptions
Please turn the power off before connect the cables.
The cable interfaces of HD-TVI speed dome are shown in Figure 2-2. The cables of RS-485, power
supply, etc. are distinguished by different colors. Please refer to the labels attached on the cables for
identification.