LTS LTN8916 Скачать руководство пользователя страница 116

Страница: 116 / 202

User Manual of Network Video Recorder

115

Auto-switch will terminate once the alarm stops and you will be taken back to the Live View interface.

You must select during “Trigger Channel” settings the channel(s) you want to make full screen monitoring.

Audible Warning

Trigger an audible

beep

when an alarm is detected.

Notify Surveillance Center

Sends an exception or alarm signal to remote alarm host when an event occurs. The alarm host refers to the PC

installed with Remote Client.

The alarm signal will be transmitted automatically at detection mode when remote alarm host is configured.

Please refer to

Chapter

错误！未找到引用源。

for details of alarm host configuration.

Email Linkage

Send an email with alarm information to a user or users when an alarm is detected.

Please refer to

Chapter

11.2.8

for details of Email configuration.

Trigger Alarm Output

Trigger an alarm output when an alarm is triggered.

Enter Alarm Output interface.

Menu> Configuration> Alarm> Alarm Output

Select an alarm output and set alarm name and dwell time. Click

Schedule

button to set the arming

schedule of alarm output.

If “Manually Clear” is selected in the dropdown list of Dwell Time, you can clear it only by going to

Menu> Manual> Alarm.

Figure 8. 16

Alarm Output Setup Interface

Set up arming schedule of the alarm output.

Choose one day of a week and up to 8 time periods can be set within each day.

Time periods shall not be repeated or overlapped.

Содержание LTN8916











































































































































































































Результаты поиска

Содержание LTN8916

Отзывы:

LTS LTN8916, Руководство пользователя, Страница: 116 / 202

Результаты поиска

Содержание LTN8916

Отзывы: