LTS LTN8704-P4 Скачать руководство пользователя страница 6

Страница: 6 / 217

User

Manual of

NVR



Playing reversely.



Adverse playback of multi-channel.



Supports pause, play reverse, speed up, speed down, skip forward, and skip backward when

playback, and locating by dragging the mouse.



Up to 8-ch synchronous playback at 4CIF real time.

Backup



Export video data by USB or SATA device.



Export video clips when playback.



Management and maintenance of backup devices.

Alarm and Exception



Configurable arming time of alarm input/output.



Alarm for video loss, motion detection, tampering, abnormal signal,

video input/output standard

mismatch,

illegal login, network disconnected, IP confliction, abnormal record, HDD error, and HDD

full, etc.



Alarm triggers full screen monitoring, audio alarm, notifying surveillance center, sending email and

alarm output.



Automatic restore when system is abnormal.

Other Local Functions



Operable by mouse and remote control.



Three-level user management; admin user is allowed to create many operating accounts and define

their operating permission, which includes the limit to access any channel.



Operation, alarm, exceptions and log recording and searching.



Manually triggering and clearing alarms.



Import and export of device configuration information.

Network Functions



1 self-adaptive 10M/100M/1000M network interface.



4 independent PoE network interfaces for B Series4 series.



Up to 8 independent network interfaces with built-in switch function are provided for B Series8

series.



IPv6 is supported.



TCP/IP protocol, PPPoE, DHCP, DNS, DDNS, NTP, SADP, SMTP, SNMP, NFS, and iSCSI are supported.



TCP, UDP and RTP for unicast.



Remote search, playback, download, locking and unlocking of the record files, and support

downloading files broken transfer resume.



Remote parameters setup; remote import/export of device parameters.



Remote viewing of the device status, system logs and alarm status.



Remote keyboard operation.



Remote locking and unlocking of mouse.



Remote HDD formatting and program upgrading.



Remote system restart and shutdown.



RS-485 transparent channel transmission.



Alarm and exception information can be sent to the remote host



Remotely start/stop recording.



Remotely start/stop alarm output.



Remote PTZ control.

Содержание LTN8704-P4


























































































































































































































Результаты поиска

Содержание LTN8704-P4

Отзывы:

Похожие инструкции для LTN8704-P4

Бренды по названию

Популярные бренды

LTS LTN8704-P4, Руководство пользователя

Результаты поиска

Содержание LTN8704-P4

Отзывы:

Похожие инструкции для LTN8704-P4

Бренды по названию

Популярные бренды