Hybrid NVR User Manual
152
1)
Click the
Create
button to create the certificate request.
2)
Download the certificate request and submit it to the trusted certificate authority for
signature.
3)
After receiving the signed valid certificate, import the certificate to the device.
Step 5
There will be the certificate information after you successfully create and install the
certificate.
Figure 11-17
Installed Certificate Property
Step 6
Check the checkbox to enable the HTTPS function.
Step 7
Click the
Save
button to save the settings.
11.2.7 Configuring Email
Purpose
The system can be configured to send an Email notification to all designated users if an event is
detected, e.g. an alarm or motion event is detected, etc.
Before configuring the Email settings, the NVR must be connected to a local area network (LAN)
that maintains an SMTP mail server. The network must also be connected to either an intranet or
the Internet depending on the location of the e-mail accounts to which you want to send
notification. Additional, the Preferred DNS server must be configured.
Before you start
Make sure you have configured the IPv4 Address, IPv4 Subnet Mask, IPv4 Gateway and the
Preferred DNS Server in the Network Settings menu. Please refer to
Chapter 11.1 Configuring
General Settings
for detailed information.
Step 1
Enter the
Network Settings
interface.
Menu > Configuration > Network
Step 2
Select the
tab to enter the
Email Settings
interface.