Network Video Recorder User Manual
114
The alarm signal will be transmitted automatically at detection mode when a remote alarm host is
configured. Refer to Chapter
for alarm host configuration.
Send Email
It will send an e-mail with alarm information to the user when an alarm is detected.
Refer to 15.7 Configure Email
for details of e-mail configuration details.
Step 3
Check the checkbox to select the alarm output when an alarm is triggered.
To trigger an alarm output when an event occurs, please refer to Chapter 11.6.3 Configure Alarm
Output
to set the alarm output parameters.
Step 4
Click
Trigger Channel
and select one or more channels that will record/capture or perform
full-screen monitoring when a motion alarm is triggered.
You have to set the recording schedule to realize this function. Refer to
Refer to Chapter 7.4
for setting the recording schedule.
Step 5
Click
Apply
to save the settings.
11.3 Configure Motion Detection Alarms
Motion Detection enables the device to detect the moving objects in the monitored area and
trigger alarms.
Step 1
Go to
System
>
Event
>
Normal Event>Motion Detection.
