Network Video Recorder User Manual
157
Figure 15-8
E-mail Settings
Step 2
Configure the following e-mail settings.
Enable Server Authentication
: Check to enable the function if the SMTP server requires user
authentication, and enter the user name and password accordingly.
SMTP Server
: IP address of SMTP Server or host name (e.g., smtp.263xmail.com).
SMTP Port
: The default TCP/IP port used for SMTP is 25.
Enable SSL/TLS
: Check to enable SSL/TLS if required by the SMTP server.
Sender
: The sender’s name.
Sender's Address
: The sender's Address.
Select Receivers
: Select the receiver. Up to 3 receivers can be configured.
Receiver
: The receiver’s name.
Receiver's Address
: The e-mail address of the user to be notified.
Enable Attached Picture
: Check to send e-mail with attached alarm images. The interval is the
time between sending two subsequent alarm images.
Step 3
Click
Apply
.
Step 4
(Optional) Click
Test
to send a test e-mail.
15.8 Configure Ports
You can configure different types of ports to enable relevant functions.