Network Video Recorder User Manual
156
Figure 15-7
SNMP Settings
Step 2
Check
Enable
. A message will pop up to notify about a possible security risk. Click
Yes
to continue.
Step 3
Configure the SNMP settings as needed.
Trap Address
: SNMP host IP address.
Trap Port
: Port of the SNMP host.
Step 4
Click
Apply
.
15.7 Configure Email
Purpose
The system can be configured to send an e-mail notification to all designated users when a
specified event occurs such as when an alarm or motion event is detected, the administrator
password is changed, etc.
Before You Start
The device must be connected to a local area network (LAN) that contains an SMTP mail server.
The network must also be connected to either an intranet or the Internet depending on the
location of the e-mail accounts to which you want to send notifications.
Step 1
Go to
System
>
Network
>
Advanced
>
.
