LTS Security LTD3216C-PL, Руководство пользователя

Страница: 97 / 353

Local Configurations 87
5.4.1 Configuring PTZ Connection Settings
You need to configure the PTZ connection settings before use.

Local connection: RS-485 Port for connecting Speed Dome or coaxial cable for connecting
coaxial camera.

Remote connection: local area network.
Step 1 Select Main Menu > CAMERA > PTZ .
The PTZ interface is displayed. See Figure 5-55.
Figure 5-55
Step 2 Configure the settings for the PTZ connection parameters. See Table 5-20.
Table 5-20
Parameter Description
Channel
In the
Channel
list, select the channel that you want to connect the PTZ
camera to.
PTZ Type

Local: Connect through RS-485 port or coaxial cable.

Remote: Connect through network by adding IP address of PTZ
camera to the Device.
Control Mode
In the Control Mode list, select Serial or HDCVI . For HDCVI series
product, select HDCVI . The control signal is sent to the PTZ through the
coaxial cable. For the serial mode, the control signal is sent to the PTZ
through the RS-485 port.
Protocol
In the
Protocol
list, select the protocol for the PTZ camera, for example,
select HDCVI3.0 .
Address
In the Address box, enter the address for PTZ camera. The default is 1.