WARNING
Donot exposethemeter torainor moistureinordertoreducetherisk of
fire or electric shock.
Observethepropersafetyprecautionswhenworkingwithvoltagesabove
30Vacrms,42Vacpeak,or60Vdc.Thesevoltagelevelsposeapotential
shockhazardtotheuser.
Inspect test leads, connectors and probes for damaged insulation or exposed
metal before using the meter.
Check the test leads for continuity before use. Do not use if the readings
are high or noisy.
Keep your fingers behind the finger guards of the test leads during
measurement.
Disconnect the test leads from the points before changing functions.
Disconnectcircuitpoweranddischargeallhighvoltagecapacitorsbefore
testing resistance.
Always use the proper terminals, switch position, and range for measurements
before connecting the meter to circuit under test.
When servicing the meter, use only specified replacement parts.
Removetestleadsfromthemeterbeforeyouopenthebatterycover.
Donotoperatethemeterwiththebatterycoverremovedorloosened.
Toavoidfalsereadings,whichcouldresultinpossibleelectricshockorpersonal
injury, replace the battery as soon as the low battery indicator appears.
Avoid working alone.
CAUTION
Disconnect the test leads from the points before changing functions.
Disconnectcircuitpoweranddischargeallhighvoltagecapacitorsbefore
testing resistance, or continuity.
Always set the meter to the highest range and work downward for an
unknown value in the manual ranging mode.
INTERNATIONAL ELECTRICAL SYMBOLS
Insulation Resistance Tester
Safety Information
MTI 801 Insulation Resistance Tester is a handheld and battery operated,
Average RMS insulation multimeter capable of testing Insulation, AC or DC
Voltages, Resistance and Continuity.
This manual contains information and warnings that must be followed for
operating the meter safely and maintaining the meter in a safe operating
condition. If the meter is not used in a manner specified in this manual, the
protection provid ed by the meter may be impaired.
This meter complies with UL 61010-1 : 3
rd
Edition, CAN / CSA - C22.2
No. 61010-1-12:3
rd
Edition,IEC/EN61010-1:2010;Overloadprotection
CAT IV600VandCATIII1000V.
TERMS IN THIS MANUAL
A
Warning
identifies conditions and actions that could pose serious hazards
totheuser.A
Caution
identifiesconditionsandactionsthatcouldcause
damage the meter or the equipment under test.
SAFETY INFORMATION
OPERATING INSTRUCTIONS
MTI 801
(041710_1)