- 5 -
QUICK START
2.1 Load Batteries
To install batteries on the camera (Part # Ltl-6510M ), please follow the instructions below.
Follow direction of arrow, push left slip switch, it will pop out.
Install 4 AA batteries. Make sure the polarity matches the sign on the cover.
Replace the cover.
To install the additional battery box (Part # Ltl-BM2), please refer to Appendix III: Instructions
For Installing Battery Box)
Alternatively the camera can run on an external 6V~12V DC power source (optional). When
both external power and batteries are connected, the camera will be powered by the external one
preferentially. Bundled with our external solar power supply (purchased separately), the camera
could work in the field over one year without changing batteries.
When battery level gets low, on the TEST mode, the message “Low Battery” will show on the
TFT screen. On live mode, the Motion Indicator in the LED array will flash blue.
2.2 Insert SD Card
The camera does not come with internal memory. So it will not work without a SD (Secure
Digital) memory card or SDHC (High Capacity) card. Before inserting the SD card into the card
slot, please make sure the write-protect switch on the side of the SD card is “off” (NOT in the
“Lock” position). The supported memory capacity is up to 32GB. If you use a card which
capacity is larger than 32GB, make sure you test it in advance.
LTL
ACORN
®