- 19 -
FIRMWARE UPGRADES
6.1 Firmware Upgrades
The manufacturer reserves the right to upgrade the camera and the firmware. Follow the
steps below to implement the upgrades:
Back up the contents on the SD card on your computer
Install batteries and the SD card in the camera.
Format the SD card on the camera.
Retrieve the SD card and insert it in your computer (SD card reader may
needed). Copy the FW6510.bin file into root directory of the SD card. (Consult
with the national distributor if there is an upgrade available and where to
download it.).
Retrieve the SD card, insert SD card back in the camera. Switch camera to TEST
position. Until the logo “Updated Firmware Successfully” appears on the TFT
screen.
Enter
MENU,
navigate the marker to
DEFAULT SET,
and press
OK
.
Re-format the SD card on the camera. The upgrade will have been installed
successfully.
Attention: A firmware upgrade program for one model is not compatible on
other models. In other word, an upgrade for Model Ltl-6510MC only applies to
this model. If a camera is accidently upgraded by a non-compatible program, it
will quit working and needs to be sent back for repair. This issue is not covered
under warranty.
LTL
ACORN
®