
5.7 FAQs on MMS Function
I set up a new receiving phone number. But the
MMS
pictures are still being sent to the old number
. What
should I do?
--Switch the camera OFF. Wait for at least two minutes. Then
switch it ON.
Or, switch the camera OFF, take all batteries out of the camera,
and then reinstall it.
Why did it
take so long to receive the MMS pictures
/ why
didn’t I receive any MMS pictures
?
--The signal is too weak. Try different spots. Or the batteries ran out.
I programmed the camera to constantly take pictures. But
some pictures were not sent to my phone
. How?
--If the signal is too weak, it may not work stably.
Why did I
just receive some pictures
or
damaged picture
?
--The camera was in motion when sending pictures. Or
the signal was unstable.
I was pretty sure the battery was quite low. But I
didn’t get
any text alert
. Why?
--The camera “assumes” you install new batteries when you start the
camera. It tracks the usage of the batteries and texts you when the power is
low. However, if you replace the present batteries with some “used” ones in
a point before receiving a text alert, the camera will get “confused” and not
send a text alert later on.
- 41 -
Содержание Ltl-5610 Series
