Ltl Acorn Ltl-5610 Series, Руководство пользователя, Страница: 27 / 52


All the order code ends with“*”, all the value ends with“#”.
E.G.:
LTL01*0#02*2#06*S30#07*10A3Z#AA
Definition: camera mode, 1.3MP, interval: 30s, serial No.: 0A3Z.
The message represents: take pictures and send back after receiving
the message.

For SMS remote control setting, different value with different extra
power consumption, “0” the highest, “off” zero. Recommended setting
is “1” or “2”.

Maximum 60 bytes for all the SMS content, for multiple parameters
setting please send by multi times. Please do not send SMS
continuously, send again only when you confirm the success of the
last order by checking. (Mobile will receive message as “Message
format OK”, it means the received message with right format).

SMS received by module, after the identification of the phone number
(the mobile number in the first of parameter settings) the module will
response immediately on parameter set format success or failure.
Note: When use order code 12, 13 to set phone number or email
address, 12 is priority for use, which means if you set 13 only
without 12, order 13 would be out of work.
When use order code 12, 13 to set email address, 14 is
priority for use, which means if you set 12 or 13 only without
14 ,order 12 or 13 would be out of work.
- 28 -