LTi Drives ServoOne Single axis system Series, Спецификация

Страница: 2 / 8

Specification Servo One
NOTE: This document does not replace the ServoOne Operation Manual.
Please be sure to observe the information contained in the “For your safety”,
“Intended use” and “Responsibility” sections of the Operation Manual. For
information on installation, setup and commissioning, and details of the war-
ranted technical characteristics of the ServoOne series, refer to the additional
documentation (Operation Manual, User Manual, etc.).
Subject to technical modifications.
The contents of our documentation have been compiled with greatest care and in com-
pliance with our present status of information.
Nevertheless we would like to point out that this document cannot always be updated
parallel to the technical further development of our products.
Information and specifications may be changed at any time. For information on the lat-
est version please refer to http://drives.lt-i.com.
Specification Option 2 - Technology
SSI encoder simulation
ID No: 1106.22B.1-00
Date: 02/2011
This documentation applies to:
Series Model Hardware version Firmware version
ServoOne
Single axis system
AC
4-450 A 4-450 A
SO
SO82.xxx.0xx4
SO84.xxx.0xx4 from ...4.xxxx.0
from ...4.xxxx.0
from V2.15 / V201.07
ServoOne
Multi axis system
DC
4-210 A 4-210 A
SO
SO84.xxx.1xx4 from ...4.xxxx.0 from V2.15 / V201.07
ServoOne junior
AC
junior junior
SO
not available -- --
Table V.1 Applicability