Geschäftsführer
Daniela Bordan
Handelsregister
AG Memmingen HRB 13410
Steuer-Nr. 54001/09616
UID-Nr. DE811 702 179
Bankverbindungen
Volksbank Laupheim eG
Konto Nr.: 760 570 03
BLZ: 654 913 20
BIC: GENO DE S1 VBL
IBAN: DE04 6549132000076057003
VR-Bank Donau-Mindel eG
Konto Nr.: 632 558 0
BLZ: 720 690 43
BIC: GENODEF1GZ2
IBAN: DE76 7206 9043 0006 3255 80
Sparkasse Ulm
Konto Nr. 58784
BLZ: 630 500 00
BIC: SOLADES1ULM
IBAN: DE79 6305 0000 0000 0587 84
Note:
1. Flashing: > 20ms ON + <180ms OFF (Depending on the refresh rate of
the DMX signal)
2. Fast-Flash: 100ms ON + 100ms OFF
3. Slow-Flash: 900ms ON + 100ms OFF
2.3 Select Wireless Group
Each time you press the button, the status indicator will change different
colors. In this case different colors mean different groups. Only when the
indicators of the transmitter and receiver show the same color they can
communicate with each other.
When the transmitter connects to the controller, the status indicator of the
transmitter would flash red. If the receiver gets the DMX signal, the
indicator would flash green.
NOTE: The first time when you press the button, it will not change the
color but show you the group that you are in. If you press it again it will
switch to other group.
W-DMX mode supports 6 groups
(FHSS, 1100 hops / sec)
1: RED ----------------------------
Red
2: GREEN ------------------------
Green
3: BLUE ---------------------------
Blue
4: RED + GREED ---------------
Yellow
5: GREEN + BLUE --------------
Cyan
6: RED + BLUE ------------------
Purple
GZ protocol supports 7 groups
(Frequency Agile)
1: RED -----------------------------
Red
2: GREEN -------------------------
Green
3: RED + GREED ---------------
Yellow
4: BLUE ----------------------------
Blue
5: RED + BLUE ------------------
Purple
6: GREEN + BLUE --------------
Cyan
7: RED+GREED+BLUE -------
White
