*Long Beep*
*Beep Twice*
or
Hold to save
Flash 3 times
press to turn on
* Z z Z z Z *
Press the black sync button on the receiver once. - The Power Indicator LED will remain static- then quickly press and hold the zone you wish to
assign that receiver to (1-8) on the remote. The Power Indicator LED on the receiver will flash faster, you’ll hear a long beep and the Sync Status
Indicator Light on the remote will flash 3 times. This indicates that the 2 devices have been synced.
Press and hold the black sync button on the receiver until you hear it beep twice
(about 10 seconds). The synced remotes will be forgotten. In case the remote
acts abnormally, simply press and hold the M2 + Power buttons simultaneously
until the remote turns off (about 3 seconds). The remote is now reset, and you
can turn it back on after about one minute.
Holding M1 or M2 (Memory 1 or Memory 2) for 3 seconds will save the current
brightness and color temperature levels to a Memory Button. To indicate a
Saved-memory the receiver will long beep and the Sync Status Indicator Light
on the remote will flash 3 times.
You can control several receivers simultaneously (ie: zones 1, 3 and 5). Press “ “ +
zones you wish to c “ “ (*135*) This will let you control all 3 zones at the
same time. To control all your receivers at the same time press “ “ twice. You can
also add unlimited receivers to one zone (ie: Zone 1 can have 10 receivers all
controlled simultaneously).
To turn on a receiver, simply tap the zone number that it is synced to.
To turn the receiver backoff, Hold down thezone number that it is synced to until
the lights go off.
ADDITIONAL FEATURES
Unsyncing and reset
Zone selection
Memory Buttons
On/Off Zone control
7.
V.2018.10.03
DYN-MZ-COMBO
4
page
support@FlexfireLEDs.com
925-273-9080 opt 2
User Guide
•
Dynamic Tunable White Multi-Zone Combo
