Zhengzhou Linghang Robot Co.,Ltd.
10 / 42
1.3 Safety notes:
Warning: do not maintain or repair the tool changer or module
，
Unless the tool is safely supported or placed on the tool stand
，
All
energized circuits (such as electrical, air, water, etc.) have been closed,
the high-voltage connection has been cleaned, and the power supply has been
discharged from the circuit in accordance with the customer's safe operation
procedures and policies.Personal injury or equipment damage may result if not
placed in the tool holder and the circuit is energized. Place the tool on the tool
holder, close and discharge all energized circuits, release all pressurized
connections, and confirm that all circuits are powered off before maintaining or
repairing the tool changer or module.
Warning: during operation, the area between the master plate and the
tool plate must be kept clean. If the area is not kept clean, the tool
changer, module or end-arm tool will be damaged and personal injury
may be caused.
Warning: the tool changer is only used for the intended application
and the application approved by the manufacturer. Using the tool
changer in unexpected use will cause damage to the tool changer,
module or arm end tool, and may cause personal injury.
2. Product overview
The LT robot tool changer enhances the universality of the robot by using a
variety of tools (such as fixtures, vacuum suction cups, pneumatic and electric
motors, welding guns, etc.). The tool changer includes a master plate installed on
the robot arm and a tool plate installed on the customer's tool. When the robot picks
up the tool, the pneumatically driven locking mechanism connects the two plates.
The fault self-locking mechanism of the patent adopts multi conical cam with ball
locking technology, Ensure during operation, If the air pressure less than 60psi (4.1