LSR TiWi-uB1, Руководство пользователя

Страница: 6 / 26

TiWi-uB1 Module
EM BOARD USER GUIDE
The information in this document is subject to change without notice.
330-0134-R1.5
Copyright © 2013-2017 LSR Page 6 of 26
3 TiWi-uB1 EM Board Hardware
3.1 RF Connector
There are two TiWi-uB1 Module versions:
LSR Part Number Description
450-0103 TiWi-uB1 Module, PCB Trace Antenna
450-0106 TiWi-uB1 Module, RF Castellation (Onboard Antenna Disabled)
Table 2 Module Part Numbers
The TiWi-uB1 EM board includes an on board U.FL RF connector J3 ( Figure 1 ). When used in conjunction
with TiWi-uB1 450-0106, J3 provides an RF connection point to external antennas or test equipment.
When the TiWi-uB1 EM board is used with used with TiWi-uB1 450-0103, the U.FL connector has no
electrical connection to the TiWi-uB1 450-0103.
The TiWi-uB1 is modular certified for FCC 15.247 and IC RSS-210, as well as compliant to the RF
requirements for ETSI EN 300 328 and ETSI EN 301 489. The TiWi-uB1 450-0106 has modular
certification when used with LSRs 001-0001 2.4 GHz Dipole Antenna with Reverse Polarity SMA
Connector.
See the TiWi-uB1 datasheet and antenna user’s guide for further information regarding FCC/IC modular
certification.
3.2 EM Interface Connectors
There are two primary connectors on the TiWi-uB1 EM Board, J1 & J2. These provide a standard
interface to Texas Instruments development platforms. Refer to
Table 3 and Table 4 below for details
on the signals brought out to the EM connectors J1 and J2. Figure 3 shows an example of a Host Board
with the mating connectors that will accept a TiWi-uB1 EM Board.
1.2"
J1 J2
19
2
20
1
19
2
20
1
Figure 3 Host Board to Accept a TiWi-uB1 EM Board (Top View)