LSR TiWi-uB1, Руководство пользователя

Страница: 19 / 26

TiWi-uB1 Module
EM BOARD USER GUIDE
The information in this document is subject to change without notice.
330-0134-R1.5
Copyright © 2013-2017 LSR Page 19 of 26
Using the Demo iOS Application
•
Power up the TiWi-uB1 EM board using either a battery or an external power supply.
•
Start the LSR iOS application ( Figure 9 ).
•
Touch the “Scan” button to scan for available TiWi -uB1 EM Boards. All available TiWi-uB1 devices
within range will be displayed. ( Figure 10 ).
•
Select the LSR TiWI-uB1 device to connect to ( Figure 10 ).
•
Touch the “Connect to uB1 Module” button ( Figure 10 ).
•
Once a connection to TiWi-uB1 EM board has been established with the iOS device, the red LED on
the TiWi-uB1 EM board will turn off and the
“C ontrol and Monitoring ” screen will become visible
( Figure 11 ).
•
Slide the LED 1 and LED 2 slide switches to manually turn on and off the red and green LEDs on the
TiWi-uB1 EM board.
•
Momentarily press the user button on the TiWi-uB1 EM board and observe the Button Status display
box change from Released to Pressed.
•
Battery or Power supply voltage is displayed in the Voltage text box . Pressing the user button for ≈ 5
sec will illuminate the Green LED, enable the 2.1 V regulator and the Voltage text box should change
to ≈ 2.1V. Pres sing the user button again for ≈ 5 Sec will disable the 2.1V regulator and the real
battery voltage will be read. Battery voltage updates every 5 seconds.
•
Touch the “RF Statistics” button at the bottom of the control and monitoring screen and the “RF
Statistics” screen will become visible showing RF statistics of the Bluetooth link between the iOS
device and the TiWi-uB1 EM board ( Figure 11 ).