LSM V5HD, Инструкция оператора

Страница: 28 / 44

28
Troubleshooting
If your machine is not operating correctly, it is generally due to a loss in electrical
power or oil pressure.
Follow the guidelines below to help eliminate the problem.
PROBLEM CAUSE REMEDY
No Electrical Power
Power on switch is turned off,
Machine is not plugged in.
Fuse is blown
MCB has tripped
Overload has tripped
Turn switch to ON.
Plug in machine
Check if the fuse has
blown and replace if
necessary.
NB.
Always use the
correct amp fuse
Reset MCP.
Reset overload.
Power is on but ram
will not move up or
down Door is not closed properly
The emergency stop Button is
pushed in Ensure the door is
closed properly.
NB.
The Auto/Ready
light will be
illuminated.
Reset the emergency
stop and start again
Door is open but can’t
get the centreplate to
rise and eject the
bale.
Push the start & Auto
buttons together within
0.5 sec.
Loose Bales Check that all slack
was removed from the
bale prior to tying
Was the bale tied with
the piston in the fully
down position?
Was the bale evenly
loaded?
If a problem still exists contact LSM service dept. on Freephone number:
1890 456 456. Or email: info@lsmltd.com or contact your local distributor.