9
Caution
In/output signal or communication cable should be at least 100mm apart from high-voltage/power wires.
Otherwise, it may cause erroneous output/operation.
Use the HMI in an environment that meets the general specification contained in this manual or datasheet.
Otherwise, it could result in electric shock, fire, erroneous operation or deterioration.
In case of much vibration in the installed environment, be sure to insulate the HMI from direct vibration.
Otherwise, it could result in electric shock, fire or erroneous operation.
Be sure not to let foreign substances such as conductive debris inside the product. Otherwise, it could result in
electric shock, fire or erroneous operation.
Wire correctly by checking each of the product’s rated voltage and terminal layout. Otherwise, it may result in
fire, electric shock or erroneous operation.
Tighten terminal screws with specified torque when wiring. If terminal screws are loose, it may result in short
circuits, fire or erroneous operation.
Use the exclusive HMI 3-type grounding for the FG terminal. If not grounded, it may result in erroneous
operation.
Be sure not to let any foreign substances such as wiring debris inside the module. Such debris may cause fire,
damage or erroneous operation.
Do not disassemble PCB from the product case or modify the product. Otherwise, it may result in fire, electric
shock or erroneous operation.
Prior to installing or disassembling the module, let all the external power off including HMI power. If not, electric
shock or abnormal operation may occur.
Use cellular phone or walky-talky at least 30cm away from the PLC. Otherwise, it may result in erroneous
operation.
When disposing of this product or battery, treat it as industrial waste. Otherwise, it may cause poisonous
pollution or explosion.