LSI Symbios SYM22801, Руководство пользователя

Страница: 43 / 80

Symbios SYM22801 Dual Channel PCI to Ultra SCSI Host Adapter 3-1
Chapter 3
Configuring the Host Adapter
This chapter discusses how to change configuration settings and
includes these topics:
•
Section 3.1, “When to Configure the SYM22801 Host Adapter,”
page 3-1
•
Section 3.2, “Starting the SCSI BIOS Configuration Utility,” page 3-2
•
Section 3.3, “Exiting the SCSI BIOS Configuration Utility,” page 3-13
3.1 When to Configure the SYM22801 Host Adapter
In most cases you should not need to change the default configuration
of your host adapter. You may decide to alter these default values if there
is a conflict between device settings, or if you need to optimize system
performance.
The following tables list the configuration settings you can change. The
global settings affect your host adapter and all SCSI devices which are
connected to it. The device settings affect only individual SCSI devices.
Table 3.1 Global Default Settings
Settings for the Host Adapter and All Devices Default Settings
SCAM Support Off
1
1. Applies to BIOS version 4.09 and later.
Parity Checking Enabled
Host Adapter SCSI ID 7
Scan Order Low to High
(0-Max)