LSI Corporation
- 4 -
MegaRAID LSIiBBU09 Intelligent Battery Backup Unit Quick Installation Guide
August 2012
Top View and Bottom View of the LSIiBBU09 Unit
Remote Connection
Connect the LSIiBBU09 unit on a remote mounting board by cable to the TMM02 module on the RAID controller
(see
Connecting a LSIiBBU09 Unit on a Remote Mounting Board to a TMM02 Module on a RAID Controller
on
page
13
for the instructions).
Top View and Bottom View of the LSIiBBU09 Unit
The following figure shows the top view and the bottom view of the LSIiBBU09 unit. The top view is the side that
you can see after you install the LSIiBBU09 unit on the system chassis or when the unit is installed on a remote
mounting board.
Figure 1 Top View and Bottom View of the LSIiBBU09 Unit
1.
Board-to-Board Connector
2.
Remote Cable Connector
WARNING
The battery used in this device might present a fire or chemical burn hazard if mistreated. Do
not disassemble, heat above 100 °C (212 °F) or incinerate. Dispose of used battery correctly. Keep it away
from children.
NOTE
Record your controller serial number in a safe location in case you need to contact LSI.
LS
IC
ORP
.©
2
010
A
LL
R
IG
HT
S R
ESE
R
V
E
D
Pb
e1
AS
SE
MB
LE
D
IN
CH
IN
A
Ro
HS
A
sRP
C
B
E248037
94V0
Li Ion
Model: BAT1S1P-A
BBU P/N: L4-25407-00
BBU S/N: SAYWWSSSSSss
Contains:
Sony US454261A8T Cell
Rechargeable Li-Polymer
Battery Pack
Rating:
3.7V; 1.59 Ah; 5.9Wh
Finished in China
WARNING: The battery used in this
device may present a risk of fire or
chemical burn if mistreated. DO NOT
disassemble, heat above 60C, crush or
puncture, short circuit external contacts,
or dispose of in fire or water.
MH29577
Li-ion
!
L3-25407-00A
Top View
Bottom View
85083-00
1
2
