LSI LSIU40SE Value Line, Руководство пользователя

Страница: 49 / 82

Starting the SCSI BIOS Configuration Utility 3-5
3.2.1.1 Change Adapter Status
Change Adapter Status allows you to activate or deactivate a host
adapter and all SCSI devices attached to it. When this option is used to
make a change, the change takes place after a reboot upon exit from the
utility.
Figure 3.2 is an example of the Change Status on Next Boot Menu.
Figure 3.2 Change Status on Next Boot Menu
To change an adapter's status, select it and press Enter. Press the
Escape (Esc) key to exit from this menu.
3.2.1.2 Adapter Boot Order
Adapter Boot Order allows the user to set the order in which host
adapters will boot when you have more than one LSI Logic host adapter
in your system. When this option is selected, the Boot Order menu
appears.
Figure 3.3 is an example of the Boot Order menu.
Figure 3.3 Boot Order Menu
To change an adapter's boot order, select it and press Enter. You are
then prompted to enter the new boot sequence number. To remove an
adapter's boot order, press Enter again rather than entering a new
sequence number. While the maximum capacity is 32 adapters, only four
Main Menu
Change Status on Next Boot:
Port
Num Irq---------Status--------NVRAM
Level Current Next-Boot Found
LSI53C875
LSI53C875
LSI53C895 FC00
F800
F801 9
9
9 On
On
On On
Off
Off Yes
Yes
Yes
Main Menu
BootSeq Bus DevFunc BootSeq Bus DevFunc
0 LSI53C875 00 A0 1 LSI53C875 00 98
2 LSI53C895 00 90