LSI LSIU40SE Value Line, Руководство пользователя

Страница: 21 / 82

Detailed Installation Procedure 2-5
Figure 2.1 Hardware Connections for the LSIU40SE
Step 6. Carefully insert edge connector J1 (see Figure 2.1 ) of the host
adapter into the PCI slot. Make sure the edge connector is
properly aligned before pressing the board into place as shown
in
Figure 2.2 .
Step 7. To plan on hooking up another host adapter on the same bus
as this host adapter, or an 8-bit device on 68-pin connector, see
Section 2.2.10.1, “Channel Switches,” discussed later in this
chapter.
Notice that the components on a PCI host adapter face the
opposite way from non-PCI adapter boards you have in your
system. This is correct, and the board is keyed to go in only
one way.
Channel B
68-Pin Internal
High Density
SCSI Interface
Channel A
68-Pin Internal
High Density
SCSI Interface
68-pin External
VHDCI SCSI
Interface J3
LSIU40SE PCI Bus
Connector on Mainboard
Channel B
LED Connector
J9
Channel A
68-pin External
VHDCI SCSI
Interface J7
Channel B
J1
J6
J4
Channel A
50-Pin Internal
Low Density
SCSI Interface
J4
Channel B
50-Pin Internal
Low Density
SCSI Interface
J8
Channel B
Termination
Override Switches
U2
Channel A
LED Connector
J5
Channel A
Termination
Override Switches
U1