LSI L64777, Техническое руководство

Страница: 79 / 124

NCO-Related Registers 4-17
4.2.17 Register 42
EXT_GAP Gap Bytes R/W [7:0]
This value indicates the number of gap bytes applied to
the TS input. These are NCO-related register fields; they
are used only in PLL Mode 2. The reset value is
0b0100 0110.
4.2.18 Register 43
THRESHOLD FIFO Measurement Threshold R/W [7:0]
This value sets the threshold for the virtual FIFO
measurement, which is used as the initial value for the
autoacquisition. These are NCO-related register fields;
they are used only in PLL Mode 2. The reset value is
0b0111 0011
Table 4.2 shows the reset values for all register fields.
7 0
EXT_GAP
7 0
THRESHOLD
Table 4.2 Reset Values for Register Fields
Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0 A
0 0 0 0 0 0 0 0 0
0 1 0 0 1 1 0 1 1
0 1 1 0 0 0 0 0 2
0 0 0 0 0 0 0 0 3
1 0 1 1 1 0 1 1 4
0 1 0 0 0 1 1 1 5
1 0 1 0 0 0 0 1 6
0 0 0 0 1 0 0 0 7
0 0 0 0 0 0 0 0 8
0 0 0 0 0 0 1 0 9
0 0 0 0 0 0 0 0 10
0 0 0 1 0 0 0 0 11