LSI 630J, Руководство по установке и обзору

Страница: 36 / 46

Turning on the Power and Checking for Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-6 630J Storage Enclosure Installation and Overview Guide
NOTE
For more information about the Seven-Segment Tray IDs, see “ ID Diagnostic
Codes on the Seven-Segment Display ” on page 4-8 .
4 Host Link 2
Active Green At least one of the four
PHYs in the IN port is
working, and a link exists
to the device connected
to the Host IN connector. A link error has occurred.
5 Ethernet Link
Active Green The link is up. (The LED
blinks when there is
activity.) The link is not active.
6 Ethernet Link
Rate Green There is a 100BASE-T rate. There is a 10BASE-T rate.
7 ESM Expansion
Link Fault Amber At least one of the four
PHYs in the OUT port is
working, but another
PHY cannot establish the
same link to the
Expansion OUT
connector. Normal status.
8 ESM Expansion
Link Active Green At least one of the four
PHYs in the OUT port is
working, and a link exists
to the device connected
to the Expansion OUT
connector. A link error has occurred.
9 ESM Service
Action Allowed Blue The ESM can be removed
safely from the storage
enclosure. The ESM cannot be
removed safely from the
storage enclosure.
10 ESM Service
Action Required Amber A fault exists within the
ESM. (This LED defaults
on at power up. This LED
turns off after the
software has completed
its power up self-test
sequence.) Normal status.
11 ESM Power. Green 12V power to the ESM is
present. Power is not present to
the ESM.
12 Seven-Segment
Tray ID Green See note. Not applicable.
Location LED Color On Off