LSG SSN100, Руководство пользователя

Страница: 11 / 20

11 ASSEMBLY INSTRUCTIONS |
STEP 5
1. Attach the Pull Unit (09) to the Bridge Tube (08), insert the Axle for Pull Unit (21) through X2 Powder
Metal Ring (31A), X2 Flat washer (36), X2 Nylon Nuts (40).
2. Attach the Butterfly Arm R (10R) to the righ t side of Pull Unit (09) through X2 Powder Metal Ring (31)
and X2 Flat Washer (36) and tighten by X Nylon Nut (40).
3. Do the same procedure for the Butterfly Arm L (10L) to the Pull Unit (9) by same parts.
4. Insert the Rubber Stopper（70（to the bracket on the Upright Support tube (05). Then adjust
the Pull Unit (09) to match the hole in the bracket.
5. Put the Foam for Butterfly Arm (53) onto the R/L Butterfly Arm (10R & 10L) and adjust to
certain position.
6. Attach the Handlebar (11) onto the ButterflyArm R (10R), tighten by X3 Curve Washer (33) and X3 Hex
Head Bolt (22). Do the same procedure of Butterfly Arm L (10L) with the other Handlebar (11).
7. Attach the Pulley Bracket (20) onto the 2 sides of Upright Support Tube (05), tighten by X2 Hex Head
Bolt (23), X4 Flat Washer (35 ) and X2 Nylon nuts (39) for 2 sides.
74
47
53
11
10L
76
37
31
31
16
36
40
36
40
22
22
22
33
33
9
10R
70
20
20
23
35
39
35
35
23
40
36
21
40
36
31A
31A
8