LSG RB-1, Руководство пользователя

Страница: 14 / 19

14
RB-1
4. COMPUTER OPERATION
PROGRAM PARAMETERS
TIME 00:00-99:59
SPEED 0.0-99.9km/h
DISTANCE 0.00-999.9km
CALORIES (CAL) 0-999.9kcal
ODOMETER (if included) 0-9999km
PULSE (if included) 40-240bpm
KEY FUNCTIONS:
MODE: This key lets you to select and lock on to a desired function.
SET (if included): Sets data for “TIME”, “DISTANCE”, “CALORIES”.
CLEAR (RESET): Resets the value to zero.
※
ON/OFF(START/STOP): Pauses signal input.
OPERATION PROCEDURES:
1. AUTO ON/OFF:

The system turns on when any key is pressed or when it receives a signal input from the speed sensor.

The system turns off automatically when the sensor has no signal input or no key is pressed for
approximately 4 minutes.
2. RESET:
The unit can be reset by either changing the battery or pressing the mode key for 3 seconds.
3. MODE:
Choose either the SCAN or LOCK function. When in SCAN mode, wait for the pointer to reach the desired
function then press the MODE key to lock the pointer
FUNCTIONS:
TIME: Press the MODE key until the pointer advances to TIME. The total working time will be shown.
SPEED: Press the MODE key until the pointer advances to SPEED. The total working time will be shown.
DISTANCE: Press the MODE key until the pointer advances to DISTANCE. The distance of each workout will
be displayed.
ODOMETER (if included):
Press the MODE key until the pointer advances to ODOMETER. The total
accumulated distance will be shown.
PULSE (if included):
Press the MODE key until pointer advances to PULSE. User’s current heart rate will
be displayed in beats per minute. Place the palms of your hands on both of the contact pads (or put ear-clip to
ear), and wait for 30 seconds for the most accurate reading.
Please Note: Pulse data is for reference only and should not be used for medical purposes.
CALORIES:
Press the MODE key until the pointer advances to CALORIES. The calories burned will be
displayed.
SCAN
: The computer will automatically cycle through the display functions every 4 seconds