1 - 9
z
When working at the edge of steep slope, take
special care about a turn-over.
z
When working, wear the protection equipment
and tighten the seat belt.
z
If the authorized passenger seat are not installed,
keep riders off.
z
On a downhill, operate the throttle pedal and
brake pedal slowly and DO NOT drive while the
transmission gear is in NEUTRAL.
z
To climb a steep slope, drive tractor slowly in
reverse up the slope rather than forward. It is
much safer.
z
When turning the tractor on a slope, pay
attention to safety especially.
z
When crossing a high ridge, let down the
implement and go straight across the ridge at
low speed.
z
When connecting the implements to the
front/rear of the tractor, install the proper
additional weights in the rear/front of the tractor
to keep the balance of the tractor.
z
Obey the traffic rules while driving on public
roads. Do not exceed the local legal speed limit.
Use a beacon or slow moving vehicle (SMV) to
indicate that the vehicle is slow moving.
z
If you can not drive the tractor due to a failure,
move the tractor to a safe place and install
troubled vehicle (safety tripod).
(Day : backward 100m ( 328 ft )
Night : backward 200m ( 656 ft))
z
Do not overuse the fuel, oil, etc and pay attention not to contact the skin directly. Generally, these
materials contain harmful materials to the human body. When you work in a area where hazardous
chemicals are sprayed, check the cabin filter (if fitted) and replace the filter with suitable one for the
purpose being used. To protect the body completely from these harmful materials, wear a safe
protection equipment such as mask, and clean the body after working.
Содержание XG3025
Страница 6: ...v FOREWORD B C Selective catalyst reduction ...
Страница 88: ...4 24 Front wheel track 7 14 4PR with rim disk W5x14 Unit mm inch 1115 43 9 in 1207 47 5 in Standard track ...
Страница 134: ...6 1 6 Dimension and Specification 4WD model Unit mm Front tires 7 14 4PR Rear tires 11 2 24 8PR 1115 1091 1374 ...
Страница 143: ...v FOREWORD B C Selective catalyst reduction ...