5 - 8
z
Check the following check points before using to avoid a failure.
5-5. Check before starting (Daily check)
Wheel bolts and
tightening of
each part
Brake, Clutch
operation
Amount of
engine coolant
Damage of Headlights,
Turn signal lights,
Horn etc.
Fuel
amount
Cleanness of
radiator screen
Amount of
Engine oil
Operation
of Indicators
Tire air pressure
and damage
Condition of air
cleaner primary
element
(1) Engine oil
z
Oil specification and capacity :
See section 5-3, “Lubricants and Capacity” or
the last page in this manual.
z
Checking engine oil level
- Check engine oil level before starting engine or
at 5 minutes later after stopping engine.
- Check if
the oil level is between MAX and MIN
mark of the oil gauge. If necessary, add new oil.
- It must only be checked while the engine is
stopped.
- If your engine is operated in dusty/dirty
condition, the service interval must be shorter
than normal condition.
- Must replace the engine oil and engine oil filter
after the first 50 hours of use.
Engine oil gauge
Oil gauge
Содержание XG3025
Страница 6: ...v FOREWORD B C Selective catalyst reduction ...
Страница 88: ...4 24 Front wheel track 7 14 4PR with rim disk W5x14 Unit mm inch 1115 43 9 in 1207 47 5 in Standard track ...
Страница 134: ...6 1 6 Dimension and Specification 4WD model Unit mm Front tires 7 14 4PR Rear tires 11 2 24 8PR 1115 1091 1374 ...
Страница 143: ...v FOREWORD B C Selective catalyst reduction ...
