LOADER REMOVAL
CAUTION:
CAUTION:
CAUTION:
CAUTION:
CAUTION:
CAUTION:
CAUTION:
CAUTION:
Never park loader without bucket
attached to the loader.
Never allow weight of tractor to be put
on parking leg when removing loader.
▶
▶
▶
▶ Park the tractor and loader on hard level
surface.
▶
▶
▶
▶ Raise the boom until the bucket is about 2
feet off the ground.
▶
▶
▶
▶ Set the parking legs with pin-hand and
Keeper.
▶
▶
▶
▶ Lower the boom until the Parking legs
make contact on the ground.
Tip the bucket until the bucket cutting edge
touch the ground.
▶
▶
▶
▶ Pull the control lever to raise the loader until
the post.
Adjust the bucket until the bottom surface of
bucket touch the ground.
▶
▶
▶
▶ Move the tractor backword slowly and stop
to avoid the hydraulic hoses being tighten.
▶
▶
▶
▶ Stop the engine and move the control lever
- 16 -
▶
▶
▶
▶ Remove the latch pin while move the
control lever back and forth slightly to make
the latch pin easy.
▶
▶
▶
▶ Stop the engine and move the control lever
back and forth, left and right several times to
reduce the hydraulic pressure in the hoses.
▶
▶
▶
▶ Disconnect the quick couplers on the
hydraulic hoses.
PIN
PIN
PIN
PIN
STAND
STAND
STAND
STAND
PIN
PIN
PIN
PIN----HAND
HAND
HAND
HAND
- 16 -
All manuals and user guides at all-guides.com
