3. Push the throttle
lever forward to middle
position of full throttle.
Caution
▶
Check each part before starting the
engine.
▶
Check if there’s anyone close to the
tractor before starting.
▶
Place the lever and switch in “Neutral”
or “OFF” position.
▶
Start the engine by sitting on the
driver’s seat after setting the PTO
switch in “OFF” and the HST pedal in
“Neutral”.
4. Turn the key switch
4. Operation and Work
4-1. Engine start and stop
(1) Engine start
HST type
Brake pedal
Throttle lever
2. Place the range gear
shift lever in Neutral, and
PTO switch in “OFF”.
1. Sin in the parking brake
lever.
4
4
4
4
- 1
to “Preheat” for 10
seconds, and check if
the preheating
indicator is “ON”.
5. Check PTO switch
and HST pedal is set in
“Neutral”, and turn the
key switch to “Start”.
As soon as the engine
starts, release the key
switch to the “ON”
position
6. Check if engine oil pressure indicator,
battery charging indicator is OFF.
If these are not go “OFF”, stop the
engine and check the problem.
7. Run engine a few minutes
to allow engine oil and
transmission oil to warm up.
Brake pedal
4WD lever
HST pedal
Throttle lever
Differential
lock pedal
Range gear
shift lever
Parking brake
lever
PTO select
lever
PTO switch
