LS ELECTRIC XGL-EFMF, Руководство пользователя, Страница: 296 / 364

Chapter 8 Additional functions
8-7
1) Connection method
Select how the connection will be made. Select Ethernet because it connects to Ethernet without using RS-
232C.
2) Connection stage:
Decide whether to establish the connection to the PLC in either remote 1-stage or remote 2-stage. Select
remote stage 1.
3) IP address:
오류
!
참조 원본을 찾을 수 없습니다
. n the figure, the connection to the PLC (1), the Ethernet module with
IP address 192.168.91.190, is taken as an example.
All subsequent steps are the same as when using RS-232C. Select OK in this state and select Connection
from the online menu. The connection with the built-in Ethernet is the same as that of the Ethernet module.
(2) Remote 2-stage connection(when using Ethernet )
If the PC running XG5000 is connected to PLC via network, the setting example of remote 1 connection to Ethernet
and PLC (A) Rnet station 1 to remote 2 are as follows.
1) Method: Select a local connection method. Remote connection via Ethernet.
2)
Step: Remote 1 stage is set same as ”Remote 1 stage connection”. Set remote 2 to set Rnet station 1.
3) Station address: In order to connect to PLC (A), set base and slot number of remote 1 Ethernet and input station
number of Rnet 1 station in remote 2 communication module.