manualshive.com logo in svg

LS Control MultiController E, Руководство пользователя

Поделиться
Скачать
LS Control MultiController E Скачать руководство пользователя страница 1

MultiController E 0-100% 

 

 
LS Control A/S 

 

 

Side 1  

 

MultiController E 0-100% 24V and 230V 

 

Manual Output Controller 0-100%, 4 Step or ON/OFF. 

Scheduler and Modbus Interface 

 

Software Version 2.7 

 

 
 
 
 
 
 
 
Content 

Description ........................................................................................................................................... 1

 

1 Mounting ........................................................................................................................................... 2

 

Terminal Connections 24V Version ............................................................................................ 2

 

Terminal Connections 230V Version .......................................................................................... 3

 

2 Functions ........................................................................................................................................... 4

 

2.1 User Interface ......................................................................................................................... 4

 

2.3 Quick Set-up .......................................................................................................................... 5

 

2.4 Menu Structure....................................................................................................................... 6

 

2.5 Main Menu and Submenus .................................................................................................... 6

 

2.6 System Information (A-Menu) .............................................................................................. 6

 

2.7 Scheduler Menu (B-Menu) .................................................................................................... 7

 

2.8 User Menu (C-Menu) ............................................................................................................. 7

 

2.9 Display Menu (D-Menu)........................................................................................................ 8

 

2.10 Service Menu (E-Menu) ...................................................................................................... 9

 

3 Setpoint Overview .......................................................................................................................... 11

 

4 Technical Data ................................................................................................................................ 12

 

5 Applied Standards ........................................................................................................................... 12

 

 

Description 

MultiController E 0-100% for adjustment of output signal (0-10V) from 0 to 100%, 4-steps or ON/OFF. 
The integrated scheduler function allows for individual adjustment of the output signal with up to 10 shifts per day. 
The scheduler/clock has an integrated battery back-up. RS-485 interface with MODBUS® protocol facilitates easy 
connection to network systems. 
Set-up is easily performed using the built-in quick guide. MultiController E 0-100% also features a micro-SD card 
reader for software updates and copying of settings. Micro-SD card reader requires micro-SD cards with LS Control 
Firmware with the capacity of ma 2Gb.

 

Содержание MultiController E













Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды