LS & S 601139, Руководство пользователя

Страница: 13 / 24

12. 11.
Safety and Warnings.
Before using the OrCam device, read these precautions carefully to avoid dangerous situations and to ensure ideal performance of your device.
Handle your OrCam device with care. It can be damaged if dropped, burned, punctured, or crushed. Do not open the outer casing of the device.
The OrCam device is designed to work in ambient temperatures between 32
0
F and 104
0
F (0
0
C and 40
0
C) and in normal conditions (Relative
Humidity of 10% to 90% RH and Atmospheric Pressure of up to 2000m above sea level (700hPa)). The device can be damaged if used outside of
this range. Store and transport in a cool, dry place (32
0
F to 104
0
F (0
0
C to 40
0
C) and Relative Humidity of 5% to 90% and atmospheric pressure of
700hPa to 1060hPa)). The OrCam device is water resistant but not waterproof. This means the device can withstand light rain or drizzle for short
periods of time, although it is not recommended. Do not use the OrCam device in heavy rain, at the beach or swimming pool, or in or near a bathtub
or shower. Do not submerge the OrCam device in any liquid. The OrCam device meets the standards of IP Code: IP22.
Should you have a problem operating the OrCam device, if the case or lens is cracked, or if you believe there is something wrong with the device,
please contact support and do not attempt to repair it by yourself. Only qualified OrCam personnel may repair or service your device. Unauthorized
repairs may void your warranty.
Do not attempt to replace the battery; you may damage it, which could cause overheating and even injury. The battery is designed to last for two
years of average use (one charging cycle per day on average) after which it may need to be replaced. Use only the charger supplied with your
OrCam device. Using another charger may void your warranty and could cause severe injury.
Do not force a connector into a port or apply excessive pressure to a button. This may cause damage that is not covered under the warranty. If a
connector does not insert easily, check for obstructions in the port and verify that you have the correct connector for that port. Do not combine
with software, hardware, or other equipment not supplied by OrCam. Exposing the device to magnetic fields may damage the unit or erase your
data.
When using the OrCam device or charging the battery, it is normal for the device to get warm. If the unit becomes excessively hot, leaks, or gives off a
burning smell, turn the device off immediately and contact OrCam Support.
If you have specific questions about use alongside an internal pacemaker and/or defibrillator, please consult your medical professional. Do not use
the OrCam device to read medication labeling.
Cleaning.
Clean your device if you feel it is dirty or transferred between users. Never touch the camera lens with your finger. Clean the lens only with the supplied
microfiber cloth and eyeglass cleaning fluid. Do not use any abrasive materials. Do not expose the device to chemicals, such as household cleaners,
aerosol sprays, solvents, alcohol, or ammonia. If you experience an allergic reaction to any of the elements of the OrCam device, contact a medical
professional.
FCC ID:
2AAWI-READ
CE Compliant Restriction of Hazardous
Substances Directive Compliant
(materials and components)
Waste Electrical and Electronic
Equipment Directive Compliant
Contact OrCam for proper disposal.
Refer to User Instruction
Guide and Manual
EN