LRX single, Руководство пользователя

Страница: 17 / 21

LRX SINGLE
Check on line for the latest updates at www.lrx-lighting.com
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
17
17
INSTALLATION OF FIXTURES ON TRUSS
OR TELESCOPIC TYPE MAN LIFTS

THIS FIXTURE MUST BE MOUNTED ON A LEVEL TRUSS.

Installation structure must be designed and approved to safely carry all
anticipated loads.

It is the user’s responsibility and obligation to determine and comply with
all applicable laws and regulations.

The installation and operation of this unit must be carried out by
authorized and qualified personnel.

Hanger bolts in hanger assembly must be installed. Both ratchet straps
must be clipped onto their respective anchor point.

Ratchet straps require minimum of 1.5 wraps on the ratchet to ensure they
remain tight.

Always use approved safety cables secured to a point capable of supporting
the total weight of the load.

All power and data cables
must have a strain relief attached.

When fixtures are mounted in close proximity to each other, care must be
taken so that output energy from one fixture is not directed at another
fixture or electrical cabling.

If cable rollers are required refer to “LRX Cable Roller” manual.

If LRX truss is to be installed, ensure that load is centered and evenly
applied to basket. Maximum capacity for LRX truss is 500 pounds evenly
distributed.

Never use damaged or compromised trusses or equipment.

Follow all lift manufactures guide-lines for load/wind capacities and de-
rating as required. Refer to the aerial equipment operator manuals & special
supplement for “Authorized and Trained Set Lighting Technicians and
Studio Grips”.