LRX™ FRESNEL
Check for the latest manual updates at www.lrx-lighting.com
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
10
10
FIXTURE SPECIFCATIONS
This unit is designed to accept. 6KSE-X, 12KSE & 18KSE Metal halide lamps
with a G38 base, as well as 10KSE & 12KSE tungsten lamps (120 – 240
VAC) with a G38 base and an arc center length of 255 & 260 mm. Place
socket to high position, see illustration above
This fixture will also accept industry standard 20KSE & 24KSE lamps (220-
240 VAC) with a G38 base, set socket to low position, see illustration above.
Note:
This fixture has an adjustable socket assembly, ensure setting is correct
prior insertion of lamp; see illustration above.
6KSE lamps with arc center length of 210mm will require a socket
extender to compensate for the shorter A.C.L., part number G38-6X. Do
not operate without socket extension in place.
The use of dimmers for tungsten lamps is strongly recommended. Bringing
tungsten lamps to full power without pre-warming the lamp and fixture
may damage the lamp or break the Fresnel lens.
Always start lamps in spot position.
Electrical:
Control power: Volts – 120 AC – non-dimmed feed line.
Hertz – 50 - 60
Amps – 2.0
U- Ground plug
Metal Halide Lamps:
6KWSE: 125VAC / 48 amps approximate
12KWSE: 160 VAC / 75 amps approximate
18KWSE– 225 VAC / 85 amps approximate
Tungsten Lamps: 10KWSE Volts: 120/240 VAC - 83/41.5 amps approx.
12KWSE Volts: 120/240 VAC - 100/50 amps approx.
20KWSE Volts: 220/240 VAC - 83 amps approx.
24KWSE Volts: 240 VAC - 100 amps approx.
