3. Display screen will automatically clear when run time is complete.
Group Paging
General Purpose
This function is used with Alpha pagers. These pagers can be programmed to respond to group calls. Ten
groups are available and each pager can be a member of 5 groups. Each pager will respond to its individ-
ual number and to any groups it belongs to. See example below.
Group Paging Rules
General rules for paging groups are:
• Pagers must be programmed in the group mode (see pg. 26).
• Staff pagers must be numbered above 100. (1-99 are reserved for groups)
• Any alphanumeric pager can be a member of up to 5 groups.
Paging Groups
1. Enter the number for the pager or the group.
• If only paging staff pagers and have the transmitter default set to Pager, enter the pager or group
number directly.
• If paging, default is set to Guest, press Staff before entering the pager or group number.
2. Enter the message to send.
3. Press Enter
GROUP 1
GROUP 2
Pager
99
Pager
51
Pager
77
Pager
94
Run time 30-3600 Seconds
REPEAT TIME
10-255 Seconds
PAGE TIME
• • •
PAGE TIME
PAGE TIME
OFF TIME
OFF TIME
Long Range Systems
13
T7400A User Manual
