DRUCK TEMPERATUR
&
Leitenberger GmbH •
Bahnhofstr. 33 • D-72138 Kirchentellinsfurt • GERMANY •
www.druck-temperatur.de
Tel. +49 (0) 7121-90920-0 •
[email protected] • E-Mail from outside Germany: [email protected]
E-Mail from Germany: DT
MANUAL
LR-
Cal
1000 Referenzthermometer
LRT
Precision reference thermometer
33
Installing the so�ware
PC
1. Download the current so�ware from the Internet. To do so, visite the website
PC
www.smartgraph3.de/download.
2. Double-click the downloaded file.
3. Follow the instruc�ons of the installa�on wizard.
Star�ng the so�ware
PC
1. Start the SmartGraph3 so�ware.
2. Switch the device on, if required.
3. Connect the device to your via the
connec�on
PC
USB
cable provided in the scope of delivery. A�er a few
seconds (up to one minute) the device is automa�cally
detected and added to the device list in the
SmartGraph3 so�ware.
Informa�on about using the so�ware is provided in the online help
PC
.
Errors and faults
The accurate func�onality of the device was tested during produc�on a number of �mes. However,
if func�onality faults do occur, then check the device according to the following list.
The device does not switch on:
• Check the charging status of the ba�eries. Change the ba�eries when the message „Ba� lo“ is
displayed upon switch-on.
• Check that the ba�eries are properly posi�oned. Check the polarity is correct.
• Never carry out an electrical check yourself; instead, contact your
&
DRUCK TEMPERATUR
Leitenberger GmbH customer service.
Mainentance
For maintenance or repair work which requires the housing to be opened, contact
&
Leitenberger customer service. Devices which have been opened
DRUCK TEMPERATUR
unlawfully are void of any warranty and warranty claims.
Cleaning the device
1. Use a so�, lint-free cloth for cleaning.
2. Dampen the cloth with clean water. Do not
use sprays, solvents, alcohol-based or
abrasive cleaners to dampen the cloth.
3. Remove dirt from the housing, the connec�ons and the
display.
