DRUCK & TEMPERATUR Leitenberger GmbH •
Bahnhofstr. 33 • D-72138 Kirchentellinsfurt • GERMANY •
www.druck-temperatur.de
Tel. +49 (0) 7121-90920-0 •
[email protected] • E-Mail from outside Germany: [email protected]
E-Mail from Germany: DT
MANUAL
LR-
Cal
1000 Referenzthermometer
LRT
Precision reference thermometer
30
„Measuring mode“ screen
fig. A
fig. B
(40)
Indicates the current temperature value.
(41)
Displays informa�on on the current measuring mode and
the characteris�c curve.
(42)
This symbol indicates, that the displayed measured values
under (43) are calculated (e.g. minimum/maximum
measured value).
(43)
Indicates the calculated measured values according to the
selec�on (e.g. minimum/maximum measured value).
(44)
Sets the measured values displayed under (43) and the
dura�on back to zero.
(45)
Specifies how the measured values under (43) are shown
(see fig. ):
B
Minimum:
Always shows the smallest detected
measured value from a measuring period.
Maximum:
Always shows the largest detected
measured value from a measuring period.
Average:
Shows the average value of all measured
values which have been detected so far
from a measuring period.
Hold:
Pauses the current detected measured
value and shows it con�nually (when this
op�on is selected).
Off:
Switches the display (42) off.
(46)
Carries out an automa�c measurement for the dura�on of
an already specified recording interval. The recording
interval can be specified in the following screen (see fig.
C
and fig. on the next page).
D
(47)
Saves the currently displayed measured values as single
measurement in the archieve with date and �me stamp.
40
42
43
44
45
47
46
41
