LOYTEC L-STAT, Руководство пользователя

Страница: 43 / 61

L-STAT User Manual 43 LOYTEC
Version 1.0 LOYTEC electronics GmbH
Description
Bit Position
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
config_display_value_x
internal temperature
(from built in sensor)
0x1 0x1 1 0x01
1 1 1 1 0 0 0 0 0 0 0 0 0 0 1 0

The value of the built in temperature sensor will be displayed with the internal
temperature symbol in °C. It will be visible for the end user and system
administrator. See the following example for how the display would look like:
config_display_value_x
relative humidity
(value supplied over Modbus)
0xA 0xA 0 0x04
1 1 0 0 0 0 0 0 1 0 0 0 0 0 0 0

This is an example of a relative humidity display value. Because the DSEU
and DSSA bit is set to
‘ 0 ’
the content of the corresponding
display_value_register will be displayed. It will be visible for the end user and
system administrator. See the following example for how the display would
look like:
config_set_point_x
relative temperature
0x1 0x1 1 0x02
1 1 1 1 0 0 0 0 0 0 0 0 0 0 1 1

This is an example of a relative temperature set point in °C. The internal
temperature symbol as well as the arrow symbol will be displayed. Since the
set point is pincode protected also the key symbol will be displayed. See the
following example for how the display would look like:
Table 31: Display Value and Set Point Example Configuration