CasaSetup
Although it is possible to use your Music Server just as it is, running CasaSetup allows you to
pick which music services you want to use, assign room names to your audio room outputs
and external sources, etc.
1. You can run CasaSetup remotely on any computer connected to the LAN.
2. 2. To run CasaSetup, start the browser of your choice (Safari, Internet Explorer 8 or
higher, Firefox, Opera or Chrome) on your computer. If using a Windows PC, enter
into the browser. On a Mac enter
http://MusicServer.local/CasaSetup
. If the browser does not connect to the Music
Server, check to make sure the Music Server is connected to the same network as your
computer (you should see little lights flashing where the network cable is plugged into
the Music Server).
3. Some networks are set up too securely for this to work properly, in which case, if you
know the IP address of the server you can enter
serverIP is the IP address of the server.
4. To manage the Loxone Music Server remotely, you can follow the directions on the
sheet “How to manage the Loxone Music Server remotely” that was included with your
Music Server.
Then, when connected to the Music Server, simply start Internet
Explorer on the Music Server and enter
5. If this still does not work, you may need to run CasaSetup directly on the Music Server
using the following directions.
If you are able to successfully start CasaSetup, skip
the next step
.
6.
If you are not able to connect using your remote computer
, you can follow the
directions on the sheet “How to manage the CasaTunes Music Server remotely” that
was included with your Music Server. Then, when connected to the Music Server,
simply start Internet Explorer on the Music Server and enter
7. Click on each of the buttons at the top of the CasaSetup page and make any necessary
changes. CasaSetup is easy to use, but if you have any problems click on help and it
will explain each field on the currently displayed page.
