10
Trolling Motor/Towfish Mount
The StructureScan transducer can be mounted on a trolling motor or towfish with
the purchase of a trolling motor mount accessory kit.
Trolling Motor Mount (sold separately — p/n:
000-00099-004
)
Trolling motor bracket
Hose Clamps (2)
No 8. Transducer attachment screws (6)
Zip ties (4)
To mount transducer on trolling motor or towfish:
Make sure the transducer cable can be routed to the LSS-1.
1.
Place the trolling motor bracket into a desired position on the trolling
2.
motor or towfish.
Route each bracket clamp around the trolling motor or towfish and
3.
through the slots on the other end of the
bracket.
Use a screwdriver to tighten the clamps
4.
until each bracket is mounted securely.
Align the holes on the transducer with
5.
the holes on the bracket.
Use the supplied transducer mounting
6.
screws to attach the transducer to the
bracket.
Use zip ties to secure the transducer
7.
cable and then connect the cable to the
LSS-1 sonar port.
If necessary, turn on the Flip Left/Right
8.
feature in your display unit. Refer to your
StructureScan Operation manual for
more information.
NOTE:
When mounting the trolling motor, you must turn on the Flip
Left/Right feature in your display unit to ensure what is shown on the
left/right side on your display, corresponds with what is on the left/
right side of your boat.
Trolling motor mount.
Towfish mount.
